Studiomaster SVC S 1000 | 1000 Watts Servo Stabilizer
- 1KVA/1000W stabilizer specifically designed for audio equipment
- Over and Under Voltage Correction (Automatically regulates in both conditions)
- Wide Input Voltage Range for Indian Conditions (180-250V)
- Accurate Voltage Control
- High Overload Capability.
- Generator suitable Design
- Short Circuit Protected.
- No Waveform Distortion
- Less than 1 sec Stabilization Time
- Voltmeter displays output voltage so no more ‘drop’ during bass thumps.
- Low noise operation
Studiomaster ORB 1822 Mixer with Bluetooth and Recording
• Professional audio mixing consoles with 18 mic / 20 line inputs.
• MON:Ster (mono-stereo) inputs for full flexibility.
• One Knob Compressor on channels 1-8.
• Ultra low-noise preamps with wide headroom and dynamic range.
• Dual multi-EFX processor with 24 DSP presets and editable parameters.
• Provisions to route EFX to monitor via Aux 1 and Aux 2.
• Built-in USB MP3 media player and recorder with Bluetooth.
• Level control, 2-band EQ with internal/external media input selection.
• 75Hz low cut on mono channels.
• 4-band EQ on all inputs.
• 5 Aux sends – Aux 1-3 (with pre/post selection) and Aux 4-5 (post only).
• Stereo AUX returns.
• Balanced XLR and ¼” jack main outputs.
• 2 sub groups with individual ¼” outputs.
• Insert (send/return) on first 4 mono channels and main output.
• Mute, solo, group (G1-G2) and main (L-R) routing per channel.
• Peak, comp, mute and solo LEDs per channel.
• Stereo RCA input and record output.
• Headphone output with level control.
• Globally switched +48V Phantom power supply.
• Responsive 60mm faders.
• 7-band stereo graphic equalizer on main output.
• Dual 10-segment LED meter for main, group and solo outputs.
• Ergonomic angled-design for better visibility.
• Clutter-free rear panel input and output connectivity.
Studiomaster PA 1.5 Dual Channel Amplifier (800+800watts)
- Professional high-power amplifiers.
- Input: Balanced XLR and 1/4” Stereo Jack.
- 3 switchable operational modes: Stereo, Mono & Bridge.
- High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms.
- High quality glass epoxy, double-sided PTH PCB’s & high-grade components ensures reliability in even tough ambient environs.
- Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks.
- Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources.
- Switchable Low-cut switch for protection & tight-low end performance.
- Switchable Limiter Switch to protects Speaker Systems from damage due to distorted input signals.
- 41-detent rotary volume knobs.
- Mute, Signal, Clip and fault LED indicators assists you to monitor performance.
- Rated for 2 Ohms operation.
Studiomaster PA 2.0 Dual Channel Amplifier (1000+1000watts)
- Professional high-power amplifiers.
- Input: Balanced XLR and 1/4” Stereo Jack.
- 3 switchable operational modes: Stereo, Mono & Bridge.
- High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms.
- High quality glass epoxy, double-sided PTH PCB’s & high-grade components ensures reliability in even tough ambient environs.
- Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks.
- Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources.
- Switchable Low-cut switch for protection & tight-low end performance.
- Switchable Limiter Switch to protects Speaker Systems from damage due to distorted input signals.
- 41-detent rotary volume knobs.
- Mute, Signal, Clip and fault LED indicators assists you to monitor performance.
- Rated for 2 Ohms operation
Studiomaster PA 3.0 Dual Channel Amplifier (1500+1500watts)
- Professional high-power amplifiers.
- Input: Balanced XLR and 1/4” Stereo Jack.
- 3 switchable operational modes: Stereo, Mono & Bridge.
- High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms.
- High quality glass epoxy, double-sided PTH PCB’s & high-grade components ensures reliability in even tough ambient environs.
- Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks.
- Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources.
- Switchable Low-cut switch for protection & tight-low end performance.
- Switchable Limiter Switch to protects Speaker Systems from damage due to distorted input signals.
- 41-detent rotary volume knobs.
- Mute, Signal, Clip and fault LED indicators assists you to monitor performance.
- Rated for 2 Ohms operation
Studiomaster PA 4.5 Dual Channel Amplifier (2250+2250watts)
- Professional high-power amplifiers.
- Input: Balanced XLR and 1/4” Stereo Jack.
- 3 switchable operational modes: Stereo, Mono & Bridge.
- High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms.
- High quality glass epoxy, double-sided PTH PCB’s & high-grade components ensures reliability in even tough ambient environs.
- Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks.
- Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources.
- Switchable Low-cut switch for protection & tight-low end performance.
- Switchable Limiter Switch to protects Speaker Systems from damage due to distorted input signals.
- 41-detent rotary volume knobs.
- Mute, Signal, Clip and fault LED indicators assists you to monitor performance.
- Rated for 2 Ohms operation.
Studiomaster PA 6.0 Dual Channel Amplifier (3000+3000watts)
- Professional high-power amplifiers.
- Input: Balanced XLR and 1/4” Stereo Jack.
- 3 switchable operational modes: Stereo, Mono & Bridge.
- High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms.
- High quality glass epoxy, double-sided PTH PCB’s & high-grade components ensures reliability in even tough ambient environs.
- Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks.
- Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources.
- Switchable Low-cut switch for protection & tight-low end performance.
- Switchable Limiter Switch to protects Speaker Systems from damage due to distorted input signals.
- 41-detent rotary volume knobs.
- Mute, Signal, Clip and fault LED indicators assists you to monitor performance.
- Rated for 2 Ohms operation.
Studiomaster PA 7.5 Dual Channel Amplifier (3750+3750watts)
- Professional high-power amplifiers.
- Input: Balanced XLR and 1/4” Stereo Jack.
- 3 switchable operational modes: Stereo, Mono & Bridge.
- High-current toroidal transformers with high-grade cores for greater transient response & low-noise even at 2 Ohms.
- High quality glass epoxy, double-sided PTH PCB’s & high-grade components ensures reliability in even tough ambient environs.
- Intelligent cooling using low-noise variable speed fans & direct mounted over-designed heat-sinks.
- Sensitivity (0dB or+4 dB) selection switch allows flexibility in connection of input sources.
- Switchable Low-cut switch for protection & tight-low end performance.
- Switchable Limiter Switch to protects Speaker Systems from damage due to distorted input signals.
- 41-detent rotary volume knobs.
- Mute, Signal, Clip and fault LED indicators assists you to monitor performance.
- Rated for 2 Ohms operation.
Studiomaster XPA 40 Dual Channel Amplifier (2000+2000watts)
- Professional-grade high-power stereo amplifier.
- Built-in crossover and bass boost switch.
- High-quality balanced XLR and ¼” stereo jack input connectors.
- 3 switchable operational modes: stereo, mono, and bridge.
- High-current toroidal transformers with high-endurance cores for greater transient response and low-noise even at 2Ω.
- Sensitivity (0.775V or 1.2V) selection switch allows flexibility in connection of input sources.
- The Limiter switch provided protects the Speaker Systems from damage due to distorted input signals.
- Responsive rotary volume control knobs.
- Low THD and high damping factor for excellent sound quality.
- High-quality glass epoxy, double-sided PTH PCBs, and high-grade components ensure reliability even in tough ambient environs.
- Intelligent cooling using low-noise variable speed fans and direct-mounted over-designed heatsinks.
Studiomaster DPA 2000 Dual Channel Amplifier (2250+2250watts)
- Professional high-power amplifiers.
- Balanced / unbalanced inputs signal through parallel XLR connector in both channels.
- Low THD & high damping factor for excellent sound quality
- Fast recovery design for lower distortion if clipping occurs.
- Selectable slide switch for stereo, parallel & bridge mono amp modes.
- Selectable sensitivity slide switch for ( 0.775V , 1V or 1.4V).
- Selectable slide switch for ground lift, Low cut & HF Limiter
- Signal and Clip LED indicators to monitor performance.
- Two variable speed fans.
- Front mounted detent gain controls for easy access.
- Indicators : Power On, Signal, Limiter, protect, Bridge
- Cooling: Twin tunnel cooling fan with front – back air flow
Studiomaster DPA 3200 Dual Channel Amplifier (3900+3900watts)
- Professional high-power amplifiers.
- Balanced / unbalanced inputs signal through parallel XLR connector in both channels.
- Low THD & high damping factor for excellent sound quality.
- Fast recovery design for lower distortion if clipping occurs.
- Selectable slide switch for stereo, parallel & bridge mono amp modes
- Selectable sensitivity slide switch for ( 0.775V , 1V or 1.4V).
- Selectable slide switch for ground lift, Low cut & HF Limiter
- Signal and Clip LED indicators to monitor performance.
- Two variable speed fans.
- Front mounted detent gain controls for easy access.
- Indicators : Power On, Signal, Limiter, protect, Bridge
- Cooling: Twin tunnel cooling fan with front – back air flow
Studiomaster DPA 4500 Dual Channel Amplifier (4550+4550watts)
- Professional high-power amplifiers.
- Balanced / unbalanced inputs signal through parallel XLR connector in both channels.
- Low THD & high damping factor for excellent sound quality.
- Fast recovery design for lower distortion if clipping occurs.
- Selectable slide switch for stereo, parallel & bridge mono amp modes.
- Selectable sensitivity slide switch for ( 0.775V , 1V or 1.4V).
- Selectable slide switch for ground lift, Low cut & HF Limiter
- Signal and Clip LED indicators to monitor performance.
- Two variable speed fans.
- Front mounted detent gain controls for easy access.
- Indicators : Power On, Signal, Limiter, protect, Bridge
- Cooling: Twin tunnel cooling fan with front – back air flow